ExcPIC
Class Description
Proportional/integral regulator excitation system. This model can be used to represent excitation systems with a proportional-integral (PI) voltage regulator controller.
Attributes
| Name | Type | Description |
|---|---|---|
| e1 | PU | Field voltage value 1 (<i>E</i><i><sub>1</sub></i>). Typical value = 0. |
| e2 | PU | Field voltage value 2 (<i>E</i><i><sub>2</sub></i>). Typical value = 0. |
| efdmax | PU | Exciter maximum limit (<i>E</i><i><sub>fdmax</sub></i>) (> ExcPIC.efdmin). Typical value = 8. |
| efdmin | PU | Exciter minimum limit (<i>E</i><i><sub>fdmin</sub></i>) (< ExcPIC.efdmax). Typical value = -0,87. |
| ka | PU | PI controller gain (<i>K</i><i><sub>a</sub></i>). Typical value = 3,15. |
| kc | PU | Exciter regulation factor (<i>K</i><i><sub>c</sub></i>). Typical value = 0,08. |
| ke | PU | Exciter constant (<i>K</i><i><sub>e</sub></i>). Typical value = 0. |
| kf | PU | Rate feedback gain (<i>K</i><i><sub>f</sub></i>). Typical value = 0. |
| ki | PU | Current source gain (<i>K</i><i><sub>i</sub></i>). Typical value = 0. |
| kp | PU | Potential source gain (<i>K</i><i><sub>p</sub></i>). Typical value = 6,5. |
| se1 | PU | Saturation factor at <i>E</i><i><sub>1</sub></i> (<i>Se</i><i><sub>1</sub></i>). Typical value = 0. |
| se2 | PU | Saturation factor at <i>E</i><i><sub>2</sub></i> (<i>Se</i><i><sub>2</sub></i>). Typical value = 0. |
| ta1 | Seconds | PI controller time constant (<i>T</i><i><sub>a1</sub></i>) (>= 0). Typical value = 1. |
| ta2 | Seconds | Voltage regulator time constant (<i>T</i><i><sub>a2</sub></i>) (>= 0). Typical value = 0,01. |
| ta3 | Seconds | Lead time constant (<i>T</i><i><sub>a3</sub></i>) (>= 0). Typical value = 0. |
| ta4 | Seconds | Lag time constant (<i>T</i><i><sub>a4</sub></i>) (>= 0). Typical value = 0. |
| te | Seconds | Exciter time constant (<i>T</i><i><sub>e</sub></i>) (>= 0). Typical value = 0. |
| tf1 | Seconds | Rate feedback time constant (<i>T</i><i><sub>f1</sub></i>) (>= 0). Typical value = 0. |
| tf2 | Seconds | Rate feedback lag time constant (<i>T</i><i><sub>f2</sub></i>) (>= 0). Typical value = 0. |
| vr1 | PU | PI maximum limit (<i>V</i><i><sub>r1</sub></i>). Typical value = 1. |
| vr2 | PU | PI minimum limit (<i>V</i><i><sub>r2</sub></i>). Typical value = -0,87. |
| vrmax | PU | Voltage regulator maximum limit (<i>V</i><i><sub>rmax</sub></i>) (> ExcPIC.vrmin). Typical value = 1. |
| vrmin | PU | Voltage regulator minimum limit (<i>V</i><i><sub>rmin</sub></i>) (< ExcPIC.vrmax). Typical value = -0,87. |
Relationships
Ancestors
Descendents
No descendent classes
Associations
None